<rp id="4fynw"><object id="4fynw"><input id="4fynw"></input></object></rp>
  • <li id="4fynw"><acronym id="4fynw"></acronym></li>
    <button id="4fynw"><acronym id="4fynw"></acronym></button>
    <em id="4fynw"><acronym id="4fynw"></acronym></em>

    <tbody id="4fynw"></tbody>

        <rp id="4fynw"><object id="4fynw"><input id="4fynw"></input></object></rp>

        新聞動態
        模具的原材料的控制從下列幾方面進行:
        模具的原材料的控制從下列幾方面進行:
        The control of the raw material of the die is carried out from the following aspects:
        1、宏觀檢驗
        1. Macro-examination
        化學成分對保證鋼材的性能是決定性的,但成分合格,不能全面來說明鋼材性能,由于鋼材內部組織和成分的不均勻性,宏觀檢驗在很大程度上補充了這方面的不足。
        Chemical composition is decisive to ensure the performance of steel, but the composition is qualified, which can not fully explain the performance of steel. Because of the heterogeneity of the internal structure and composition of steel, macro-inspection to a large extent complements this deficiency.
        宏觀檢測可以觀察鋼的結晶情況,鋼的連續性的破壞和某些成分的不均勻性。
        Macroscopic examination can observe the crystallization of steel, the destruction of continuity of steel and the inhomogeneity of some components.
        標準《結構鋼的低倍組織缺陷評級圖》GB1979
        Standard "Rating Chart of Defects in Low Macrostructure of Structural Steel" GB1979
        宏觀常見8種缺陷:偏析、疏松、夾雜、縮孔、氣泡、白點、裂縫、折疊。
        There are 8 common macroscopic defects: segregation, porosity, inclusion, shrinkage, bubble, white spot, crack and folding.
        模具圖片模具圖片
        Mould picture Mould picture
        2.1、退火組織的評定
        2.1. Assessment of Annealing Microstructure
        退火的目的,降低鋼的硬度,便于機加工,同時也為后續的熱處理作組織準備。
        The purpose of annealing is to reduce the hardness of the steel and to facilitate machining. At the same time, it is also to prepare the structure for subsequent heat treatment.
        碳素工具鋼退火組織按GB1298第一級別評級圖評定。
        The annealing structure of carbon tool steel is evaluated according to the first grade grading chart of GB1298.
        2.2、碳化物不均勻性
        2.2. Carbide inhomogeneity
        Cr12型萊氏體鋼,組織中含有大量的共晶碳化物,碳化物不均勻性對使用性能產生非常重要的影響,所以對其碳化物的分布必須有嚴格的控制。
        Cr12 type ledeburite steel contains a lot of eutectic carbides in its structure. Carbide inhomogeneity has a very important impact on its performance, so the distribution of carbides must be strictly controlled.
        總而言之,由于模具生產廠和車間的生產對象比較繁瑣,并且多少又是單件、小批量,從而為模具生產定額的制定和管理帶來一定的難度,再加上各廠和車間的生產方式、設備、技術素質又不太一樣,所以在制定定額時,必須要根據本廠和車間的實際情況,找出適當的方法制定出既先進又合理的工時定額,以提高勞動生產率的目的。
        In a word, because the object of production in the mould factory and workshop is rather complicated, and it is more or less single-piece and small-batch, it brings some difficulties to the formulation and management of the mould production quota. Moreover, the production mode, equipment and technical quality of each factory and workshop are different. Therefore, when formulating the quota, it is necessary to find out the suitable one according to the actual situation of the factory and workshop. When the method is adopted, the advanced and reasonable working hours quota can be worked out to improve labor productivity.

        聯系方式

        1. 保定市浩宇模具制造有限公司
        2. 電話:17725550027(微信同號)
        3. 聯系人:史經理

        版權 ? 保定市路沿石模具廠 冀ICP備17023554號 網址:www.www.sbputpt.com  推薦:路沿石模具,路邊石模具,生態護坡模具,路沿石鋼模具

        一卡二卡三卡四卡网站,啦啦啦啦在线视频免费播放,一卡二卡三卡四卡五卡中文字幕,男生和老师一起差差差的游戏,啦啦啦啦啦视频在线播放免费1 清河县| 安达市| 岳普湖县| 罗源县| 额尔古纳市| 高阳县| 通化县| 庆元县| 灵武市| 石家庄市| 江油市| 奉化市| 湖口县| 方城县| 丹巴县| 柞水县| 叶城县| 和静县| 龙陵县| 陆川县| 盖州市| 台山市| 岢岚县| 和平县| 九龙城区| 敦化市| 保亭| 梓潼县| 吉首市| 宣汉县| 北海市| 麦盖提县| 涟水县| 德江县| 通化市| 宁蒗| 洪雅县| 宝丰县| 营山县| 嘉祥县| 河间市| 浦东新区| 阜宁县| 凤冈县| 永春县| 安龙县| 龙游县| 祁连县| 祁门县| 鸡西市| 新乐市| 南和县| 安泽县| 筠连县| 长宁区| 东乡| 浦东新区| 甘洛县| 塔河县| 河池市| 历史| 酉阳| 西华县| 浦北县| 隆子县| 阿坝县| 安化县| 三门峡市| 滨海县| 克拉玛依市| 南岸区| 雷州市| 木里| 阜新市| 桑日县| 甘谷县| 长海县| 开封市| 望城县| 汉源县| 库尔勒市| 哈尔滨市|